Diagram of LAUNCH X-431 24V CAN adapter expansion module (SO816)  Connecting the LAUNCH DBScar Trailer-16+7+7 diagnostic connector (SO817) with a LAUNCH trailer diagnostic device supporting TEBS-E diagnostic software.

Diagram of LAUNCH X-431 24V CAN adapter expansion module (SO816)  Connecting the LAUNCH DBScar Trailer-16+7+7 diagnostic connector (SO817) with a LAUNCH trailer diagnostic device supporting TEBS-E diagnostic software.

This adapter is designed to connect modern diagnostic scanners with an OBD2 connector to TESLA cars (2019, 2020, 2021,2023 Model 3 and Model Y). The OBD2 port allows you to read CANBUS data that is not available on the main screen: battery temperature, engine temperature, cell voltage, etc.

Specifications:

12 Pin Male Female Connector for Tesla 2012-2015 model S/X OBDII diagnostic harness electronic cable of new energy (Before placing an order,
please confirm the OBD interface model of your vehicle)

1. The premium material gives the cable excellent flexibility and durability.
2. Small size, light weight, easy to store, easy to carry and use.
3. Plug and play, easy to install, does not affect the function of the original car.
4. Corrosion and wear resistance.
5. Power supply voltage: 9-16V

This connector is suitable for Model S and Model X models. It can test fault codes, clear fault codes, and support special functions. Check the official website to find out which special functions are supported. (http://qcar.x431.com/qcar/#/)

The specific wiring diagram of the Tesla-12+20 connector:

Part [1] is the Tesla-12+20 connector (12PIN) wiring diagram, which is applicable to S(X) models produced before September 2015 (including September);
Part [2] is the Tesla-12+20 connector (20PIN) wiring diagram, which is suitable for S(X) models produced after September 2015.

Package Includes:
1*OBDII TO 12Pin for Tesla Model S/X(2012-2015)

LAUNCH RH850 Adapter Board for Data Reading & Writing of Various RH850 Microcontrollers

1.Product Function:

3. Figure 1 shows an example of a connection diagram.

4. Connection method:

Connect each end of the RH850 adapter board to the MCU and MCU harness according to the following correspondence:

RH850 Adapter Board	MCU	MCU Harness
VOUT	ISOVCL	╳
GND	ISOVSS	╳
VCC	╳	3
IN	╳	5

Package includes:

1pc x LAUNCH RH850 Adapter Board

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standard.

The SmartLink B system consists of the following two parts:

SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Launch X431 SmartLink B Features
Compatible with LAUNCH tools, OE tools or any other diagnostic tools
SmartLink can be used not only remote diagnosis but also local diagnosis by working with LAUNCH intelligent diagnostics
Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU
Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform

Requires Activation card.

Launch X431 SmartLink B Service Platform:
SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C user can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

Launch X431 SmartLink B Management Modes:

The service provider can select ONE of the two Management Modes:
The service provider manages the Smartlink C account status of the customer.
The service provider can activate the Smartlink C under his own account and manage the Smartlink C (post remote diagnosis request, license renewal) for the customer.
The customer doesn’t need to do anything on the platform, he just needs to contact the service provider and connect the Smartlink C hardware to the vehicle.
The customer manages the Smartlink C account status himself.
The customer can register his own user account on the SRDs platform and manage the Smartlink C (post remote diagnosis request, license renewal) himself.
The service provider can “Pre-bind” the customer’s Smartlink C, after “Pre-bind”, the customer’s request can only be seen by this service provider. No worry about other provider taking the customer.

NOTE: Each Smartlink can be activated only in one account.

How Does the LAUNCH SMARTLINK REMOTE DIAGNOSIS WORK?
This picture may help you better understand the complete procedure of the Smartlink remote diagnosis.

Launch X431 SmartLink B Packing List:
The following accessory items are for reference only. For detailed items, please consult with a local agency or check the packing list supplied with the device.

SmartLink B Dongle – For SmartLink Service Subscriber
OBD II Extension Cable – Connects the dongle to the vehicle’s DLC port
CAT-6 Crossover Cable – Connects the dongle to the network modem
Data Cable – Connects the dongle to the PC via the data cable when as a J2534 PassThru device.

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via SmartLink Service Platform.

Launch X431 SmartLink C Features

1. Compatible with LAUNCH tools, OE tools or any other diagnostic tools
2. Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU
3. Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform
4. SmartLink can be used not only remote diagnosis but also local diagnosis by working with LAUNCH intelligent diagnostics

Requires Activation card

SRDs SmartLink:
Super Remote Diagnosis Solution:
SRDs is comprised of SmartLink C, SmartLink B and Cloud Platform.
The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected with any diagnostic device.
The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:
SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C user can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

How Does the LAUNCH SMARTLINK REMOTE DIAGNOSIS WORK?
This picture may help you better understand the complete procedure of the Smartlink remote diagnosis.

Launch X431 SmartLink C Packing List:
The following accessory items are for reference only. For detailed items, please consult with a local agency or check the packing list supplied with the device.

SmartLink C Dongle – For SmartLink Service Provider
OBD II Extension Cable – Connects the dongle to the VCI of the compatible diagnostic tool
CAT-6 Crossover Cable – Connects the dongle to the network modem
Power Adaptor – Supplies power to the dongle through an AC outlet.

Package Includes:

To reset Tesla airbag crash data, you will need Launch X431 scanner (PAD VII, PAD V, X431 V 8inch, X431 V+, Pro5, Pros V1.0, Pros V5.0, Pro3s+, Pad II, X431 Throttle etc) , Tesla software license and this Special Tesla airbag repair.

NOTE: The airbag connector is included in the LAUNCH X431 EV Diagnostic Upgrade Kit. If you have the EV Kit, don’t need to buy the adapter separately.

Package Includes:

1pc x Special connector for Tesla airbag repair, RoHS

Function:
Used in local area network (LAN) function (car enters maintenance mode), currently supported products: X-431 PAD V, PAD VII series, EV MAX, X431 PRO 3S+ V3.0/V5.0 etc diagnostic tools with Simplified Chinese, Traditional Chinese, Japanese, Korean, Arabic and Russian software.
Wiring diagrams

1). 2018 onwards Model 3/Model Y

2). 2022 onwards Model S/Model X

3). 2018-2021 Model S/Model X

4). 2014-2018 Model S/X Tegra chip MCU

Packing List
1pc X X431 Tesla LAN Cable