Please send us the serial number before purchase, we will check it first.

Notice:
1. This renewal card is used for Launch X431 V+ SmartLink HD (PRO3 LINK HD) with a 12V Passenger Vehicle license activated.
2. It will take 24-48 hours for the Launch technicians to operate the update service.

HOW TO ACTIVATE 12V Passenger Vehicle LICENSE?

1. Login X431 PAD
2. Go to Local Diagnose – Store– Passenger Vehicle software activation/ renewal- Subscription Renewal Card
3. X431 PAD will ask to submit a 24-digit renew card pin code, Put The 24-digit pin we sent you.
4. Manually enter pin code and submit
5. Activation done. Software will expire 1 year from now

Highlights:

1. Can be applied to LAUNCH X431 PAD series (PAD VII, PAD V, X431 V 8inch, X431 V+, Pad II, X431 Throttle etc)
2. Tesla software can be purchased here or directly from X431“Mall”by card payment.
3. Software service, no need shipping.

Notice:
1. Provide your X431 device serial number to activate license after payment.
2. With one year expiration. It is an optional software because it cost a lot to develop.

Current Software Version: V10.06 

TESLA Model List:

Tesla Model S, Model X, Model 3 2014-2020
Model S 2014 2015 2016 2017 2018 2019 2020
Model X 2016 2017 2018 2019 2020
Model 3 2014 to 2020

Support Systems:

BDY
THC
TPMS
PARK2
SDM by BOSH
TAS
BMS
ESP

Tesla Software Update Log V10.05:

1. Added DTCs for some systems of Model S and Model X.
2. Added the following service functions for systems (such as the battery management system, tire pressure monitoring system, drive inverter, and airbag system) of Model 3, Model S, and Model X: reset contactor stress counter U019, clear contactor stress result, learn VIN automatically, reset crash data automatically, reset anti-theft system, read resistance
3. Added the following common service functions: clear airbag crash data, read EEPROM, brake bleeding, calibrate charging door, key learning, key service, AIR service
4. Added the instructions for the airbag crash data reset function of each model.
5. Optimized the car model menu structure. Added the special function menu.
6. Optimized the quick test and system scanning functions.

• Online activation. No real shipping. Hardware is not included.
• It will take 2-3 wroking days. And once add OK, can not cancel, please note!!!
• Update IMMO Elite to IMMP Plus to enable full system diagnostic, active test and ECU coding functions.
• Send us your device SN after purchase, thanks.

What can you get after you update from Launch X431 IMMO Elite to IMMO Plus?

• Support TSGUN TPMS add-on
• Supports ECU coding, active test and guided function
• Supports advanced system diagnostic, this will alow IMMO Plus supports more brands vehicles to do full system diagnostic,module initialization and free resets

Item	Launch X431 IMMO Plus	Launch X431 IMMO Elite
Image
Price	$1060	$920
Language	24 Language Supports: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional	24 Language Supports: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional
Update	2 Years free update	2 Years free update
Read immobilizer password	Yes	Yes
Ignition key learning	Yes	Yes
Benz BMW VAG Porsche key programming	Yes	Yes
ECU Gearbox TCU Cloning (IMMO Prog)	Yes	Yes
Anti-theft password car coverage	More	More
Nissan B18 Immo replacement without password	Yes	Yes
Toyota all keys lost (pre-2022)	Yes	Yes
Volvo all keys lost (-2022)	Yes	Yes
Peugeot all keys lost	Yes	Yes
Citroen all keys lost/ module replacement	Yes	Yes
Independent IMMO function for each car brands	Yes	Yes
Basic diagnostic function	Yes	Yes
Active Test (Di-directional)	Yes	No
Special function under each car brands	Yes	No, no VAG guided function, Renault special function under Diagnostic.
Common Service reset functions	Yes	Yes
Guided function	No	No
Online programming	No	No

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via the SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standards.

Please Note Before the Purchase:

1. Only supports devices using Smartlink C as VCI. Such as X431 PAD V Elite, PAD VII Elite, PRO5, Smartlink C. Please note that the Heavy Truck module does NOT support the opening of Super Remote.
2. Before you buy this 50 times super remote function, please make sure you have activated the function on your device. The first-time Super Remote Activation License inside comes with the free 3 times the card, valid for one year
3. You can buy the card according to your needs after the free 3 times card is used up. There is no annual fee, the charge is per time.
4. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
5. Please make sure to provide the serial number of your device to us at sales@x431tool.com after purchase.
6. This Super Remote Activation License does not need shipping, please give us 2-3 working days to process it.

Launch X431 Smartlink C Features

– Compatible with LAUNCH tools, OE tools, or any other diagnostic tools.
– SmartLink can be used not only for remote diagnosis but also for local diagnosis by working with LAUNCH intelligent diagnostics.
– Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU.
– Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform.

The SmartLink B system consists of the following two parts:

• SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
• SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Super Remote Diagnosis Solution:

– SRDs are comprised of SmartLink C, SmartLink B, and Cloud Platform.

– The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected to any diagnostic device.

– The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C users can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

Note:
1. Please confirm that Smartlink C Activation Card has been activated.
2. Can’t support customers in the United States, Canada, Mexico, Australia, Brazil, Japan.
3. No Hardware No need shippping.
4. No return and refund service.

Please Provide Product Picture with Serial Number.

Notice:

1. Needed For Users With Smartlink C To Use Times Cards One Time Purchase For The First Time Only Is Required.
2. Get free 1 times Activation Card,valid for one year.
3. Can’t support customers in the United States, Canada, Mexico, Australia, Brazil, Japan.
4. No Hardware No need shippping.
5. No return and refund service.
6. Only supports devices using Smartlink C as VCI. Such as X-431PAD V / X-431PAD VII / X-431 PRO5. For the Stand-alone Launch Smartlink C Device, please buy Launch smartlink C Activation.
7. After free times run out, you can buy 1 Time Activation Card, 10 Times Activation Card, 20 Times Activation Card, 50 imes Activation Card, Annual Activation Card for use.
Smartlink B Buy Annual Activation Card Directly.

Please Provide Product Picture with Serial Number.

How to activate SmartLink C Connector?

To activate the Smartlink remote diagnosis function, you need to access http://smartlink.x431.com/ through the APP or through a browser.
After logging in to the smartlink remote service platform, activate the remote diagnosis function of the Smartlink connector.
The smartlink remote diagnostic function can only be used after the Smartlink connector is activated through the above method.
Note: North America, Australia are not supported.

Steps for SmartLink C Activation: 

1. Log in http://smartlink.x431.com/

2. Select user type.

3. Fill in the registration information

4. The binding and activation of the C-side, the serial number and activation code of the C-side are entered here.

5. Enter the card number and password of the Smartlink C activation card.

6. Enter vehicle information, contact information, etc., to submit an appointment.

7. When choosing service technician, try to choose a service provider that you are familiar with.

8. Wait for the service provider to contact you to negotiate the processing time, etc.

Note:
1. Please confirm that Smartlink C Activation Card has been activated.
2. Can’t support customers in the United States, Canada, Mexico, Australia, Brazil, Japan.
3. No Hardware No need shippping.
4. No return and refund service.

Please Provide Product Picture with Serial Number.

Note:

1.  Annual card + Unlimited times + included Activation Card License already
2. The more times you need, the more cost-effective it is to purchase an annual card.
3. Can’t support customers in the United States, Canada, Mexico, Australia, Brazil, Japan.
4. No Hardware No need shippping.
5. No return and refund service.

Please Provide Product Picture with Serial Number.

How to activate SmartLink C Connector?

To activate the Smartlink remote diagnosis function, you need to access http://smartlink.x431.com/ through the APP or through a browser.
After logging in to the smartlink remote service platform, activate the remote diagnosis function of the Smartlink connector.
The smartlink remote diagnostic function can only be used after the Smartlink connector is activated through the above method.
Note: North America, Australia are not supported.

Steps for SmartLink C Activation: 

1. Log in http://smartlink.x431.com/

2. Select user type.

3. Fill in the registration information

4. The binding and activation of the C-side, the serial number and activation code of the C-side are entered here.

5. Enter the card number and password of the Smartlink C activation card.

6. Enter vehicle information, contact information, etc., to submit an appointment.

7. When choosing service technician, try to choose a service provider that you are familiar with.

8. Wait for the service provider to contact you to negotiate the processing time, etc.

If you want to update your LAUNCH X431 PRO Elite , LAUNCH X431 PROS ELITE after 2 years free update service expired, you can buy this service to extend another one year free update.

Note:

1. Before You purchase the update service, please provide the serial number for confirm if we can help to provide the update service first.
Because the devices which were brought from overseas dealer can not be provided update service. Please notice this
2. it is One Year Update Service
3. Very easy to operate, no need shipping
4. Suitable for: LAUNCH X431 PRO Elite, LAUNCH X431 PROS ELITE
5. it will need 24hours for the Launch technician to do the update service

How to get the Subscription Renewal Service?

1. After you place an order on our website and check out, please provide us your device serial number.
2. We will open one year update authorization for you.
3. The Launch technician will open the update service online, no need shipment.
4. We will send Subscription Renewal Card with Card Number and Password to you by email.

How to activate the Subscription Renewal Card?

1. Open the X431 Lanuch app——>Software Update ——>Renewal
2. Choose the Use renewal card ——>renew standard software configuration
3. Click ”Confirm” in the lower right corner
4. Enter the 24-digit activation code

If you want to update your Launch X-PROG3 GIII PC Adapter after one year free update service expired, you can buy this service to extend another one year free update.

Note:

1. Before You purchase the update service, please provide the serial number for confirm if we can help to provide the update service first.
Because the devices which were brought from overseas dealer can not be provided update service. Please notice this
2. it is One Year Update Service
3. Very easy to operate, no need shipping
4. Suitable for: Launch X-PROG3 GIII PC Adapter
5. it will need 24hours for the Launch technician to do the update service

How to get the Subscription Renewal Service?

1. After you place an order on our website and check out, please provide us your device serial number.
2. We will open one year update authorization for you.
3. The Launch technician will open the update service online, no need shipment.
4. We will send Subscription Renewal Card with Card Number and Password to you by email.

How to activate the Subscription Renewal Card?

1. Tap the application icon on the home screen to launch it.
2. Tap “Login” on the upper right corner of screen to log in the system (Note: Please make sure the tool has a strong Wi-Fi connection).
3. Tap TVEG)PU2DTG0Q2X9`ZPY5PM and select “Update” to enter the update center.
4. Tap “Renewal” on the update page to activate Subscription Renewal Card.
5. Input the password of Subscription Renewal Card (24-digit numbers) and then tap “Confirm” to finish the transaction