No products in the cart.
Launch Creader Series
LAUNCH X431 Elite Professional Car Diagnostic Tools Full Function Auto OBD2 Code Reader Scanner PK X431 V for AUDI/BENZ/BMW/GM
Professional automotive scan tool specially designed to diagnose electronic control systems for AUDI/BENZ/BMW/GM which can read/erase codes, view live data, and retrieve ECU version information in all available vehicle systems including Engine,Transmission, ABS, SRS, TPMS, EPB,Body System,Battery,ESP, IMMO etc.
$159.00
2022 NEW Arrival LAUNCH X431 Elite Car Professional Full Function Diagnostic Tools Auto OBD1 OBD2 Code Reader Scanner For AUDI/BENZ/BMW/GM
LAUNCH Creader Elite for AUDI/BENZ/BMW/GM with Full System Diagnostic tools
Professional automotive scan tool specially designed to diagnose electronic control systems for AUDI/BENZ/BMW/GM which can read/erase codes, view live data, and retrieve ECU version information in all available vehicle systems including Engine,Transmission, ABS, SRS, TPMS, EPB,Body System,Battery,ESP, IMMO etc.
Multilingual Supported
English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, Traditional Chinese, Polish. All languages are free to use.
ECU Coding
Offers you online coding functions, which enable you to directly communicate with the OEM server and access the online data to identify replaced modules to ensure smooth information communication, activate hidden functions, and adjust the vehicle settings
Active Test ( BI-Directional Controls )
The scanner allows you to activate or control a vehicle system or component,it can send commands to the ECU, read ECU data to determine the integrity of the system or component, and monitor the operation of the components,let you to quickly understand whether a specific system, component or subsystem is operating normally.
Guided Function
Guided Function provides you with the guided function especially for Audi. Offering on-screen instructions to guide you step-by-step through the complexities of the situation.
31+ Reset Function
30+ commonly used functions to meet the needs of daily maintenance diagnostic and reset,such as Oil Lamp Reset,SAS Reset,Brake-pad Reset,Electronic Throttle Sensor Reset,TPMS Reset,Injector Coding,Gearbox Matching,IMMO Service, Transport Mode,Stop/Start Reset,Suspension Matching,AFS Reset,A/F Reset,ODO Reset,A/C Learning,intelligent Cruise Control, etc.
Smart (Auto-Detect) Diagnosis
Adopts Auto-VIN technology that will automatically recognize vehicle information which you get the vehicle’s make,model and year information more easily and then it will automatically generate a full system Health Report which you can quickly access all the electronic control units of vehicle and generate a detailed report about vehicle health.
1. Steering Angle Reset
Reset the steering angle to zero to keep the car running straight.
2. Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.
3. IMMO
Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.
4. DPF Regeneration
Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.
5. A/C relearn
The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.
6. ABS Bleeding
Help exhaust the air after repair the ABS pump system.
7. AdBlue Reset
Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
8. Throttle Matching
Initialize the throttle actuators to the default state.
9. TPMS Reset
Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
10. Tire Reset
Set the size parameters of the modified or replaced tire.
11. AFS Headlamp Reset
Initialize the adaptive headlamp system.
12. Sunroof Initialization
Initialize the sunroof when locked off or closed.
13. Battery Reset
Register the battery after replacement.
14. Seat Calibration
Calibrate the memory in replaced or repaired seats.
15. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
16. A/F Reset
Set or learn Air/Fuel ratio parameters.
17. GEARBOX LEARN
Help complete the gearbox self-learning to improve gear shifting quality.
18. Transport Mode
Deactivate the transport mode.
19. Windows Calibration
Perform door window matching to recover ECU initial memory.
20. Language Change
Change vehicle system language.
21. Suspension Reset
Adjust the vehicle body height sensor for level calibration.
22. NOx Sensor Reset
Reset catalytic converter learned value stored in ECU.
23. Stop/Start Reset:
Set up the automatic start-stop function in ECU.
24. Coolant Bleeding
Activate the electronic water pump.
25. Brake Reset
It is important in the maintenance of electronic braking system’s safety and efficiency.
26.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
ect …
(Maintenance Functions available will depend on the specific vehicle model, not all models and these functions supported by the model are free and do not need to be purchased in the Mall)
Full OBD2 Check–Make a Better Detection for Car Engine System!
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
More Features you can get!
●Live Data on Graph
●Auto Vin Reading, Makes Diagnostic More Fast
●Display Real-Time Battery Voltage
●Screenshot & Screen Recorder, Scan the QR to Share & Print Diagnostic Report
●One-click Update Online
●DTC lookup
LAUNCH X431 Elite Vehicle Coverage
Compatible for AUDI/BENZ/BMW/GM above before 2021 (More vehicle coverage can be extended. It allows to subscribe to other cars in the Mall module. The subscription fee may depend on different cars.）
Please note:
* LAUNCH Creader Elite For Audi
* LAUNCH Creader Elite For BENZ
* LAUNCH Creader Elite For BMW
* LAUNCH Creader Elite For GM
Technical Detailed：
• Screen Size:4″ Touch Screen
• Resolution:480*800 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 16GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle’s DLC
• Working Temperature: -10℃ to 45℃ (14℉ to 113 ℉)
• Storage Temperature: -20℃ to 70℃ (-4℉ to 158 ℉)
Packing List:
1* LAUNCH Creader Elite Special Car Scanner
1* 5V DC Charging cable
1* User manual
1* Quick Start Guide
1* packaging
| Weight | 1.2 kg |
|---|---|
| Version | For AUDI, For BENZ, For BMW, For GM |
Based on 0 reviews
Be the first to review “LAUNCH X431 Elite Professional Car Diagnostic Tools Full Function Auto OBD2 Code Reader Scanner PK X431 V for AUDI/BENZ/BMW/GM”
Related products
- Launch Creader Series
LAUNCH X431 CRP909E OBD2 Car Full System Diagnostic Tool Code Reader Scanner with 15 Reset Service
Launch Creader SeriesLAUNCH X431 CRP909E OBD2 Car Full System Diagnostic Tool Code Reader Scanner with 15 Reset Service
LAUNCH CRP909E Scan Tool is the Newest LAUNCH CRP series product.Its the first car code reader which can do Full system diagnosis and support 15 special service functions in the world.Quickly generate and store a vehicle Health Diagnostic Report as a reference for vehicle inspection and maintenance.
SKU: SC528 - Launch Creader Series
Original LAUNCH Creader CRP129E 4 System Diagnostic with Oil Service/ EPB/ SAS/ Throttle Body Reset
Launch Creader SeriesOriginal LAUNCH Creader CRP129E 4 System Diagnostic with Oil Service/ EPB/ SAS/ Throttle Body Reset
Launch X431 CRP129E is an evolutionary smart solution for passenger car diagnosis. It is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
SKU: SC196-C - Launch Creader Series
LAUNCH X431 CRP129X OBD2 Scanner Auto Code Reader Diagnostic Tools TMPS Automotive Scanner Obd2 Diagnostic Tool Professional
Launch Creader SeriesLAUNCH X431 CRP129X OBD2 Scanner Auto Code Reader Diagnostic Tools TMPS Automotive Scanner Obd2 Diagnostic Tool Professional
LAUNCH CRP129X OBD2 Scan Tool Android Based Upgraded from CRP129, 4 System Diagnoses with Oil Reset, EPB/SAS/TPMS and Throttle Service, Battery Voltage Graghing, AutoVIN for Small Shops and DIYers
SKU: SC405
There are no reviews yet.