Why Recommend LAUNCH CRB5001 ?
? 3 IN 1 OBD2 Scanner：All 12V Battery Tester + 4 System Diagnostic + 6 Reset Service
Combines the functions of the popular CRP123E /CRP129E / BST360, Support Lifetime Free Update , which is a high-end comprehensive Car Scanner, more functions spend less money, value for every car owners or car technicians.
? 4 System Diagnostic for Engine ABS SRS Airbag Transmission + Auto VIN Scan
LAUNCH CRB5001 Diagnostic Scanner is perfect balance of power and affordability, providing the ability to view preset, or user defined, live data streams, providing the ability to view preset, or user defined, live data streams for the ability to graph, record, replay and print data, read and resets codes for 4 systems. Launch Scanner shows quick and accurate vehicle identification via AutoVIN scan, helping you pinpoint the cause issue by reading code, freeze frame and real-time live data.
? Support 10 modes of OBD II Test
LAUNCH Creader Battery 5001 Full OBD2 Scan Tool Supports all 10 modes of OBDII standard to ensure complete and accurate system diagnosis. It can Read and Earse fault codes about emission, Turns off the MIL (check engine), I/M Readiness, Read Data Stream, freeze frame data display, EVAP system test, retrieve vehicle information and so on to assist in speeding diagnosis and repair time and money, suitable for personal auto repair and small auto repair factory.
? 6 Reset Service + Health Report + Health Report Print-
LAUNCH CRB5001 OBD2 Scanner can do total 6 Special Resets including Oil Reset, Brake Reset, ABS Bleeding Reset, TPMS Reset, Battery Reset, Throttle Position Reset. Even if you are a beginner, you can perform basic maintenance on your own. ALL diagnostic data can be record and generate to diagnostic report which can be shared to email then print on computer. he function list is related to vehicle’s make, model, and year.
? Battery Health, Charging and Cranking Test
With LAUNCH CRB5001 Automotive Battery Tester, we can check the overall health of the battery, including the cranking test, and run a complete system charging test. The cranking test is to test and analyze the starter motor to check if the starter motor is working properly, and the charging test is to check the state of the charging system to avoid damaging the battery. It is much more convenient than driving a few miles to a nearby auto repair store.
? 2022 Newest Version + Lifetime Free Update
Creader Battery 5001 Code Reader works on most vehicles after 1996 compliant with OBD2 protocols, more than 57 brands and over 10000+ cars, more car models will being continuously updated, supported Lifetime Free Upgrade, 4″ LCD Color Touch Screen, 10 Languages menu options, you can easy to access the each of menu options, more faster and convenient.
English,French,Spanish,German,Italian,Russian,Portuguese,Japanese,Korean,Traditional Chinese, Polish
. All languages are free to use.
Supports 54+ Models Coverage
For AUDI , For AUSTHOLDEN , For AUTOSEARCH , For BENZ , For BMW , For CHRYSLER , For CITROEN , For DAEWOO , For DEMO , For EOBD2 , For FIAT , For GM , For HONDA , For HYUNDAI , For JPISUZU ,For KIA , For LANDROVER , For MAZDA , For MITSUBISHI , For NISSAN , For OPEL , For PEUGEOT ,For PORSCHE, For RENAULT, For SAAB , For SEAT , For SKODA , For SMART , For SPRINTER , For SUBARU , For SUZUKI , For TOYOTA , For USAFORD , For VOLVO , For VW
4 System Diagnostic -Get You Safe Journey Home.
Engine System Diagnosis
By Reading, Clearing DTCs and viewing Live Data Stream, the scan tool can help you easily pinpoint the cause of the Engine System problem and turn off the warning light related, thus ensuring the engine works properly, and enhancing its performance.
ABS System Diagnosis
By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this LAUNCH Creader scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.
SRS System Diagnosis
By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.
Transmission system diagnosis
By checking the Transmission system, this tool can figure the problem out via reading codes, or check the health status via Live Data viewing, and turn off the warning light, making sure that the right amount of power goes to the wheels to drive at a given speed.
6 HOT Services. Handle Your Daily Car Maintenance.
1. Oil Lamp Reset function
this obd2 scanner allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil, clear the oil light .
2. ABS Bleeding
Help exhaust the air after repair the ABS pump system.
3. Throttle Position Reset
Initialize the throttle actuators to the default state.
4. Brake Reset
It is important in the maintenance of electronic braking system’s safety and efficiency.
Register the battery after replacement.
Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
OE-Level LAUNCH CRB5001Battery Tester for 12 V Battery
Charging Health Test
This function mainly detects and analyzes the vehicle charging system, including generator, rectifier, rectifier diode, etc. Through this test, we can know that the output voltage of the generator, the rectifier diode, and the charging current is normal or not respectively.
Start System Test
It is mainly to detect and analyze the starting motor, detect the actual starting current and starting voltage required by the starting motor, so as to judge whether the starting motor is normal or not.
Battery Health Test
It is used to analyze the health status of the automobile battery, calculate the actual cold starting ability of the battery, judge the aging degree of the battery, and provide reliable analysis basis for the test and maintenance of the battery.
In & Out of Vehicle
Launch CRB5001 battery tester have 2 test methods. which can be more convenient and faster.
In Vehicle – no need to remove the battery. You can directly check the vehicle battery under the hood.
Out of Vehicle – can test the independent battery.
Support common battery types,
Test Voltage Range: 10V~16V
Support Test Functions: Battery Health Test, Start System Test, Charging System Health Test
Support Battery Types: AGM/GEL/AGM Spiral/EFB/Regular Flooded/Lead-acid batteries
Support Battery Standards: CCA(100~1700), BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
Review Test Report: You can review and share your diagnostic report or send it with the screenshot function to everyone you want.
With polarity reversal protection, clip reversal will not damage the tester, nor will it have any adverse effect on the car and battery.
It can directly test the loss battery, no need to fully charge it first and then test it.
Support full OBD function.
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic display.(3 data stream display modes available: figure/value/4 data stream in one graph)
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Auto VIN Scan
AutoVin OBD2 scan tool connect the vehicle and automatically obtain vehicle information including manufacturer, year, model, etc., to save time and conduct a quick diagnosis, but not for ALL cars.
This CRB5001 car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.
Share & Print Diagnostic Report
CRB5001 car scan tool will record every detail of the diagnostic session, enables your to share & print a diagnostic report for further analysis, no worry about forgetting details.
4 in 1 Live Data Stream
There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.
Online Diagnostic Feedback
LAUNCH TECH’s engineers will help you troubleshoot problems. Customized exclusive beta version software for your car can be obtained here.
1.LAUNCH Creader Battery 5001 Tool
3.Battery Clamps Cable